What we buy
Ranges we buy on this page
Transformer Buyers NC buys used, surplus, failed and obsolete Schneider Electric transformers throughout North Carolina. This page covers cast-resin equipment, transformers associated with medium-voltage switchgear, inspection records and removal planning for plant engineers, facility directors and demolition crews.
| Phase | kVA | Voltage | Fluid |
|---|---|---|---|
| 1-phase | 10 - 333 kVA | 600 V - 25 kV | Liquid or dry |
| 3-phase | 15 kVA - 20 MVA | up to 230 kV | Liquid or dry |
Who we buy from
Six kinds of seller
- Recyclers
- Electrical contractors
- Equipment dealers
- End users
- Demo contractors
- Distributors
Fast offers
A written offer the same business day, based on your photographs.
Dedicated logistics
Our own crew, trailer and crane, not a brokered haul.
No broker fees
One buyer from first call to cleared pad, with nothing skimmed.
How it works
Six steps from photograph to payment
- 01
Take pictures
Photograph the nameplate, the inside of the cabinet and the tank from both ends. Four frames on a phone are enough to price most units.
- 02
Send them to us
Email or text the photographs with the site address and whether the unit is still energised. We reply the same business day with questions or a number.
- 03
Review the offer
The offer names the unit, the site, the price and the pickup window. It is written, dated and good for thirty days unless the unit changes hands.
- 04
We schedule freight
A crew, a trailer and a crane if the pad needs one. You get the date and the arrival window, and the site does not have to close for it.
- 05
Testing on arrival
Winding resistance, insulation resistance and a turns ratio check, plus oil analysis where the unit is liquid-filled. Results travel with the unit.
- 06
Get paid
Payment is released against the signed bill of sale and the scale ticket, by check or ACH, with the paperwork copy left on site.
What we handle
The parts sellers dread
Rigging
Crane, skates and a route survey for anything that will not roll onto a trailer.
Oil containment
Pans, absorbent and a spill plan before a drain plug is touched.
Bill of sale
A document that clears a lien, a lease or a bankruptcy file, not a handwritten note.
PCB paperwork
Testing and manifesting for pre-1979 oil, handled before the unit moves.
On the ground
What makes a Schneider Electric different
Schneider Electric is a French group that absorbed Square D and built a large medium-voltage distribution business. On a North Carolina site, that history can leave Schneider and Square D identification in the same electrical room.
Read the transformer plate separately from labels on adjacent switchgear.
Integrated medium-voltage switchgear and cast-resin units are important Schneider Electric design signatures, supported by strong documentation. A transformer may belong to a coordinated distribution assembly rather than stand alone.
Arrangement drawings help distinguish its enclosure, cable compartment and ventilation requirements from those of the neighboring switchgear bays.
Local reality
Schneider Electric vintages and models in the state
Older Square D identification and newer Schneider Electric branding can both appear in North Carolina facilities. A logo alone does not establish the transformer construction or manufacturing date.
Record the model, serial number and date from the actual plate, then compare those entries with the facility's drawings.
For a Charlotte plant shutdown, separate cast-resin units from other dry-type equipment before preparing the asset list. Include each transformer's kVA, primary voltage and secondary voltage.
A 480-volt secondary describes an electrical connection; it does not identify the insulation system, winding condition or exact Schneider model.
Around the site
Where they fail
Resin cracking is a known concern on cast units. Cracks deserve close photographs showing their location on the winding, not just a wide shot through the enclosure door.
Schneider cast-resin equipment with visible damage needs its operating history reviewed before anyone treats the defect as merely cosmetic.
Partial discharge is another concern, particularly in humid locations. In a coastal North Carolina electrical room, condensation history, ventilation failures and water intrusion belong in the condition record.
Discharge reports help establish whether an issue was persistent, developing or investigated after an isolated alarm during prior operation.
Where it sits
The nameplate and the paperwork
Photograph the Schneider Electric transformer nameplate squarely enough to read the kVA, voltages, frequency, impedance and connection diagram. Capture the insulation class and temperature-rise information where listed.
The enclosure plate can carry different information, so do not substitute a cabinet label for the winding assembly's identification.
Schneider documentation can explain how a transformer fits into its medium-voltage assembly. Keep the original arrangement drawing, wiring diagram, test reports and maintenance records together.
For equipment removed from a Durham facility, mark revised cable routes or replaced components so the paperwork describes the unit actually being evaluated.
On the ground
Inspection priorities
Our review includes partial discharge history, the class rating and whether the enclosure is sealed. Record the precise class designation rather than reporting only a letter without context.
A sealed cabinet and a ventilated cast-resin enclosure present different inspection questions, especially where moisture has reached cable terminations.
With the Schneider unit isolated under the site's electrical safety procedure, a qualified crew can document resin surfaces, winding supports, terminal connections and enclosure condition. Photograph contamination and tracking without wiping away evidence first.
Previous cleaning records and discharge test methods help explain what an inspection can establish.
Local reality
Getting a Schneider Electric out of the building
Removal starts with the Schneider arrangement drawing and a measured route from the electrical room to the loading area. Check door clearances, floor loading and turns around switchgear bays.
A hospital basement in Raleigh may require a different rigging sequence than a ground-level plant room in Greensboro.
Do not assume the enclosure roof or switchgear frame is a lifting point. Confirm the transformer's designated lifting provisions, documented weight and separation requirements before selecting a spreader bar or forklift.
Protect cast-resin windings from contact damage, and identify which cables, barriers and supports must remain with the assembly.
Around the site
How the brand affects what we pay
Schneider Electric identification helps establish the equipment family, but brand alone does not establish suitability for purchase. Cast-resin condition, partial discharge records and readable nameplate data carry more useful information than the logo.
Missing assembly drawings can leave uncertainty about connections, enclosure construction and separation from associated switchgear.
We buy Schneider Electric equipment in North Carolina whether it is used, surplus, failed or obsolete. Evaluation separates documented operating condition from assumptions about the brand.
A failed cast-resin winding, an incomplete enclosure and an intact unit with maintenance records each require a different review and removal plan.
Get started
Get an offer in minutes
Five fields is all it takes. Photographs help, but a nameplate and a town are enough to start.
No fee, no obligation. We reply the same business day.
Tell us what you have
We reply the same business day.
Questions
Straight answers
Equipment types
Do you buy Schneider units with cracked resin?
Yes. We buy failed Schneider Electric transformers, including cast-resin units with cracking. Document the crack locations, nameplate and any partial discharge findings. Keep the equipment isolated under the facility's safety procedure; photographs and existing reports are preferable to energizing damaged windings for an evaluation.
Service area
Does a Square D label identify Schneider equipment?
Schneider Electric absorbed Square D, so both names can appear in a facility's distribution equipment. The transformer nameplate remains the starting point.
Payment
Which records matter for humid North Carolina locations?
Partial discharge history, moisture incidents and enclosure details are especially useful for Schneider cast-resin equipment in humid locations. Include test dates and methods, ventilation maintenance and any condensation reports.
Logistics
Inspection priorities: what should a seller know?
Our review includes partial discharge history, the class rating and whether the enclosure is sealed. Record the precise class designation rather than reporting only a letter without context.