What we buy
Ranges we buy on this page
Transformer Buyers NC buys used, surplus, failed and obsolete Marcus Transformer equipment throughout North Carolina. This page covers the New Jersey manufacturer's dry-type and specialty transformers, including custom industrial and marine designs.
It is for plant engineers, shipyard crews, facility directors and asset managers documenting equipment for removal. The review starts with the nameplate, design specification, enclosure rating and test report, not the badge alone.
| Phase | kVA | Voltage | Fluid |
|---|---|---|---|
| 1-phase | 10 - 333 kVA | 600 V - 25 kV | Liquid or dry |
| 3-phase | 15 kVA - 20 MVA | up to 230 kV | Liquid or dry |
Who we buy from
Six kinds of seller
- Recyclers
- Electrical contractors
- Equipment dealers
- End users
- Demo contractors
- Distributors
Fast offers
A written offer the same business day, based on your photographs.
Dedicated logistics
Our own crew, trailer and crane, not a brokered haul.
No broker fees
One buyer from first call to cleared pad, with nothing skimmed.
How it works
Six steps from photograph to payment
- 01
Take pictures
Photograph the nameplate, the inside of the cabinet and the tank from both ends. Four frames on a phone are enough to price most units.
- 02
Send them to us
Email or text the photographs with the site address and whether the unit is still energised. We reply the same business day with questions or a number.
- 03
Review the offer
The offer names the unit, the site, the price and the pickup window. It is written, dated and good for thirty days unless the unit changes hands.
- 04
We schedule freight
A crew, a trailer and a crane if the pad needs one. You get the date and the arrival window, and the site does not have to close for it.
- 05
Testing on arrival
Winding resistance, insulation resistance and a turns ratio check, plus oil analysis where the unit is liquid-filled. Results travel with the unit.
- 06
Get paid
Payment is released against the signed bill of sale and the scale ticket, by check or ACH, with the paperwork copy left on site.
What we handle
The parts sellers dread
Rigging
Crane, skates and a route survey for anything that will not roll onto a trailer.
Oil containment
Pans, absorbent and a spill plan before a drain plug is touched.
Bill of sale
A document that clears a lien, a lease or a bankruptcy file, not a handwritten note.
PCB paperwork
Testing and manifesting for pre-1979 oil, handled before the unit moves.
On the ground
Marcus Transformer's design signature
Marcus Transformer is a New Jersey manufacturer associated with dry-type and specialty transformers. Its custom designs for industrial and marine service make the original design specification especially important. Two enclosures with similar dimensions can contain different winding arrangements, voltage connections or installation requirements.
For a Marcus unit removed from a Wilmington marine facility, the service environment matters alongside the electrical rating. A custom enclosure may reflect mounting space, ventilation or exposure requirements. Record those features before separating panels, brackets or terminal covers from the assembly.
Local reality
The Marcus Transformer units we see in North Carolina
North Carolina owners may identify Marcus equipment during plant shutdowns, marine refits or electrical room renovations. The review distinguishes a complete dry-type assembly from a loose core-and-coil unit.
Photographs should show the enclosure, terminal compartment and any separate mounting frame or ventilation components.
At an industrial site in Charlotte, documentation may be scattered between maintenance files and an EPC contractor's closeout package. Match the Marcus serial number to those records.
Surplus equipment with intact paperwork requires a different removal assessment from a failed unit with disconnected leads.
Around the site
Known failure modes
Salt corrosion is a concern on Marcus marine units, particularly around enclosure seams, fasteners and terminal hardware. Look for flaking metal, damaged coatings and corrosion beneath mounting feet. A clean outer panel does not establish the condition of connections inside a salt-exposed enclosure.
Winding aging can affect Marcus dry-type equipment after extended service, especially where ventilation has been restricted. Discolored insulation, brittle lead coverings and a burnt odor warrant documentation.
Report the operating history and any trip event without treating appearance alone as proof of electrical condition.
Where it sits
Reading a Marcus Transformer nameplate
A readable Marcus nameplate should be photographed straight on, with enough light to capture the serial number and electrical ratings. Record kVA, primary and secondary voltage, phase, frequency and connection information where shown. Include a second photograph identifying the complete unit carrying that plate.
Custom Marcus designs can require more interpretation than a voltage entry alone provides. Compare tap markings and connection diagrams with the design specification before describing the unit.
If a plate lists an enclosure rating, preserve that information even when corrosion has damaged the surrounding cabinet.
On the ground
What we check on site
The on-site Marcus review checks the design specification, enclosure rating and test report against the actual assembly. Serial numbers should agree across the documents.
Missing panels, replaced terminal blocks or field-added ventilation openings deserve separate notes because they may change what the original paperwork describes.
Before inspection in a Raleigh facility, qualified site personnel must isolate the Marcus unit and verify absence of voltage under the site's electrical safety procedure. Our condition review then records accessible winding surfaces, mounting hardware and enclosure damage.
It does not certify the equipment for energization.
Local reality
Transport and rigging notes
A Marcus dry-type enclosure is not automatically a lifting structure. Locate documented lifting points on the assembly or obtain a qualified rigging assessment before attaching slings.
Thin cabinet panels, ventilation louvers and terminal brackets should not carry the load during removal from a machinery space.
For removal near Morehead City, confirm doorway clearance, dock access and the route to the loading area before selecting transport equipment. Use documented weight and dimensions for the Marcus assembly.
Secure loose covers separately, and protect exposed windings from rain, road debris and shifting restraints.
Around the site
What the badge does to value
The Marcus badge helps identify the manufacturer, but a custom design needs its supporting records. Industrial or marine service requirements can limit compatibility with another installation.
The design specification and test report explain more about the assembly than the brand name stamped on its enclosure.
Condition remains central to our assessment of Marcus equipment in North Carolina. Salt corrosion, winding aging, missing leads and damaged mounting feet each affect handling and evaluation.
An intact enclosure rating label is useful evidence, but it cannot replace inspection of the cabinet and winding assembly.
Get started
Get an offer in minutes
Five fields is all it takes. Photographs help, but a nameplate and a town are enough to start.
No fee, no obligation. We reply the same business day.
Tell us what you have
We reply the same business day.
Questions
Straight answers
Equipment types
Do you buy failed Marcus marine transformers?
Yes. We buy failed Marcus marine transformers in North Carolina, including units affected by salt corrosion or winding aging. Provide nameplate photographs, the failure history and any test report. Identify damaged mounting feet or loose enclosure panels before planning removal.
Service area
Which documents help identify a custom Marcus unit?
The design specification, connection diagram and test report help identify a custom Marcus transformer. Match each document to the nameplate serial number. For industrial or marine assemblies, include enclosure rating information and drawings showing mounting arrangements, terminal locations and ventilation requirements.
Payment
Can a Marcus enclosure support lifting slings?
Do not assume the Marcus enclosure can support lifting slings. Check the manufacturer's drawing for designated lifting points and documented weight. If that information is missing, have a qualified rigger assess the assembly before moving it through a North Carolina facility.
Logistics
The Marcus Transformer units we see in North Carolina: what should a seller know?
North Carolina owners may identify Marcus equipment during plant shutdowns, marine refits or electrical room renovations. The review distinguishes a complete dry-type assembly from a loose core-and-coil unit.