What we buy
Ranges we buy on this page
Transformer Buyers NC buys used, surplus, failed and obsolete Rex Manufacturing transformers anywhere in North Carolina. This page covers the Ohio manufacturer's dry-type and specialty equipment, including heavy enclosures, conservative winding design and the records needed for evaluation.
| Phase | kVA | Voltage | Fluid |
|---|---|---|---|
| 1-phase | 10 - 333 kVA | 600 V - 25 kV | Liquid or dry |
| 3-phase | 15 kVA - 20 MVA | up to 230 kV | Liquid or dry |
Who we buy from
Six kinds of seller
- Recyclers
- Electrical contractors
- Equipment dealers
- End users
- Demo contractors
- Distributors
Fast offers
A written offer the same business day, based on your photographs.
Dedicated logistics
Our own crew, trailer and crane, not a brokered haul.
No broker fees
One buyer from first call to cleared pad, with nothing skimmed.
How it works
Six steps from photograph to payment
- 01
Take pictures
Photograph the nameplate, the inside of the cabinet and the tank from both ends. Four frames on a phone are enough to price most units.
- 02
Send them to us
Email or text the photographs with the site address and whether the unit is still energised. We reply the same business day with questions or a number.
- 03
Review the offer
The offer names the unit, the site, the price and the pickup window. It is written, dated and good for thirty days unless the unit changes hands.
- 04
We schedule freight
A crew, a trailer and a crane if the pad needs one. You get the date and the arrival window, and the site does not have to close for it.
- 05
Testing on arrival
Winding resistance, insulation resistance and a turns ratio check, plus oil analysis where the unit is liquid-filled. Results travel with the unit.
- 06
Get paid
Payment is released against the signed bill of sale and the scale ticket, by check or ACH, with the paperwork copy left on site.
What we handle
The parts sellers dread
Rigging
Crane, skates and a route survey for anything that will not roll onto a trailer.
Oil containment
Pans, absorbent and a spill plan before a drain plug is touched.
Bill of sale
A document that clears a lien, a lease or a bankruptcy file, not a handwritten note.
PCB paperwork
Testing and manifesting for pre-1979 oil, handled before the unit moves.
On the ground
The engineering behind Rex Manufacturing
Rex Manufacturing's background is in Ohio dry-type and specialty transformer construction. Heavy enclosures and conservative winding design are its identifying characteristics.
For an owner clearing a North Carolina plant, those features make the design specification more useful than a quick judgment based on cabinet size or appearance.
A specialty Rex unit needs to be evaluated against its intended duty, not treated as interchangeable with every dry-type transformer of similar dimensions. Primary and secondary voltage, frequency, taps and connection arrangement belong in that review.
The original design specification establishes what the winding assembly was built to do.
Local reality
Installed base across North Carolina
For a Rex transformer located in a Charlotte plant or a Triad industrial building, the practical starting point is its actual installation record. An Ohio manufacturer name does not establish the local service history.
Owners should identify the room, connected equipment and any changes made since initial commissioning.
A Raleigh facility director handling a Rex removal should document whether the unit remains connected, has been isolated or is already sitting on a pallet. Those conditions change the inspection plan.
Building access, loading dock clearance and the route from the electrical room matter alongside the nameplate data.
Around the site
Failure patterns worth knowing
Enclosure corrosion is a known concern on Rex Manufacturing equipment. Check the cabinet base, seams, door edges and areas around ventilation openings.
Surface rust and metal loss are different findings; photographs should show both the affected area and the surrounding enclosure so its condition can be assessed accurately.
Terminal wear is another Rex failure pattern worth recording before removal. Loose hardware, damaged contact surfaces and heat discoloration call for closer examination by qualified personnel after isolation.
Describe which terminal is affected and preserve maintenance notes rather than labeling the entire transformer failed without identifying the observed defect.
Where it sits
Nameplate, serial and test records
A legible Rex nameplate photograph should capture the manufacturer, serial number, kVA, voltage ratings, frequency and connection information shown on the plate. Photograph any separate diagram or specification label as well.
A cropped image that omits the serial number can prevent the unit from being matched to its paperwork.
We check the design specification and the test report when evaluating Rex Manufacturing transformers. Match both documents to the serial number wherever possible.
For specialty equipment, a report without clear unit identification leaves uncertainty about whether its measurements describe the transformer being removed or another assembly from the same project.
On the ground
Site inspection
Inspection of a Rex dry-type unit starts with safe access and verified isolation under the site's electrical safety procedures. Qualified personnel can then examine enclosure corrosion, terminal wear, winding contamination and mounting condition.
Photographs of the interior should include terminal markings and the relationship between windings, supports and cabinet.
At a North Carolina demolition site, record damage from the shutdown separately from damage caused during dismantling. A bent Rex enclosure door, missing terminal hardware or broken support may change the handling plan.
Keep the nameplate attached and retain loose labeled parts with the corresponding unit until evaluation is complete.
Local reality
Rigging a Rex Manufacturing unit
The heavy enclosure on a Rex Manufacturing transformer is not proof that every cabinet edge can carry a lifting load. Confirm the documented weight and approved lifting points before selecting slings or a spreader bar.
Where drawings are missing, a qualified rigger should establish the method before movement begins.
For removal from a Greensboro electrical room, measure the Rex cabinet, door opening and travel path before bringing in handling equipment. Check floor capacity and loading dock conditions against the planned load.
Secure doors and loose panels, and protect terminals from straps, fork contact and impacts during the move.
Around the site
Brand value in the secondary market
Rex Manufacturing identification helps establish the equipment's engineering background, but the name alone does not settle a buying evaluation. The design specification, test report, enclosure condition and terminal condition carry more detail.
A specialty winding arrangement must be understood before its suitability for another application can be judged responsibly.
Transformer Buyers NC buys Rex units in used, surplus, failed and obsolete condition throughout North Carolina. Evaluation should distinguish a documented winding problem from enclosure corrosion or terminal wear.
Keeping the serial record, photographs and test paperwork together gives an owner a clearer description of the equipment being considered.
Get started
Get an offer in minutes
Five fields is all it takes. Photographs help, but a nameplate and a town are enough to start.
No fee, no obligation. We reply the same business day.
Tell us what you have
We reply the same business day.
Questions
Straight answers
Equipment types
Can you buy a failed Rex Manufacturing transformer?
Yes. Transformer Buyers NC buys failed Rex Manufacturing transformers across North Carolina. Identify the reported failure and include photographs of enclosure corrosion, worn terminals or other visible damage. A matching test report helps distinguish a documented electrical fault from an unverified shutdown diagnosis.
Service area
Which records matter for a specialty Rex unit?
The design specification and test report are especially important for a Rex specialty transformer. Include the nameplate and serial number so those records can be matched to the unit.
Payment
Should the Rex enclosure stay attached during removal?
Do not remove the Rex enclosure solely to simplify handling without reviewing the removal plan. Its heavy construction affects the load, and dismantling can expose windings and terminals to damage.
Logistics
Nameplate, serial and test records: what should a seller know?
A legible Rex nameplate photograph should capture the manufacturer, serial number, kVA, voltage ratings, frequency and connection information shown on the plate. Photograph any separate diagram or specification label as well.