What we buy
Ranges we buy on this page
Transformer Buyers NC buys used, surplus, failed and obsolete electrical transformers in Hickory and across North Carolina. This page explains which buyers handle equipment from the furniture corridor, what matters on a 240-volt delta nameplate, and how removal is planned.
| Phase | kVA | Voltage | Fluid |
|---|---|---|---|
| 1-phase | 10 - 333 kVA | up to 25 kV | Liquid or dry |
| 3-phase | 15 - 20,000 kVA | 34.5 kV | Liquid or dry |
Who we buy from
Six kinds of seller
- Recyclers
- Electrical contractors
- Equipment dealers
- End users
- Demo contractors
- Distributors
Fast offers
A written offer the same business day, based on your photographs.
Dedicated logistics
Our own crew, trailer and crane, not a brokered haul.
No broker fees
One buyer from first call to cleared pad, with nothing skimmed.
How it works
Six steps from photograph to payment
- 01
Take pictures
Photograph the nameplate, the inside of the cabinet and the tank from both ends. Four frames on a phone are enough to price most units.
- 02
Send them to us
Email or text the photographs with the site address and whether the unit is still energised. We reply the same business day with questions or a number.
- 03
Review the offer
The offer names the unit, the site, the price and the pickup window. It is written, dated and good for thirty days unless the unit changes hands.
- 04
We schedule freight
A crew, a trailer and a crane if the pad needs one. You get the date and the arrival window, and the site does not have to close for it.
- 05
Testing on arrival
Winding resistance, insulation resistance and a turns ratio check, plus oil analysis where the unit is liquid-filled. Results travel with the unit.
- 06
Get paid
Payment is released against the signed bill of sale and the scale ticket, by check or ACH, with the paperwork copy left on site.
What we handle
The parts sellers dread
Rigging
Crane, skates and a route survey for anything that will not roll onto a trailer.
Oil containment
Pans, absorbent and a spill plan before a drain plug is touched.
Bill of sale
A document that clears a lien, a lease or a bankruptcy file, not a handwritten note.
PCB paperwork
Testing and manifesting for pre-1979 oil, handled before the unit moves.
On the ground
Straight answer
Transformer Buyers NC buys transformers from Hickory owners, including furniture plants retiring older electrical equipment. A unit does not have to operate to be considered.
Burned windings, leaking radiator seams and obsolete connections need to be described clearly, along with the nameplate and the owner's authority to release it.
A transformer feeding a Hickory plant's 240-volt delta service needs more than a photograph of the tank. The secondary connection, any center tap and the grounding arrangement help identify the equipment.
Record those details from drawings or the nameplate rather than assuming every three-phase delta unit is identical.
Local reality
The buyers
Different buyers handle different equipment from the Hickory furniture corridor. Transformer specialists examine voltage, winding configuration, condition and removal requirements. Scrap processors may focus on material recovery instead.
For the owner, the useful distinction is whether the buyer understands the complete unit and its handling requirements.
Ownership comes before buyer selection on a Hickory service entrance. A transformer beside a plant may belong to the serving utility rather than the building owner.
Check asset records and the service agreement; if Duke Energy owns the unit, the plant cannot authorize its transfer independently.
Around the site
Valuation
Assessment starts with the Hickory unit's nameplate: kVA, primary voltage, secondary voltage, phase, frequency and connection diagram. On older furniture-plant equipment, photograph every readable marking before cleaning or moving anything.
A 240-volt delta designation alone does not establish winding condition, insulation condition or the transformer's suitability for another application.
Condition records give a failed Hickory transformer context that exterior photographs cannot. Include the trip event, test reports, oil leaks and any evidence of overheated bushings.
For liquid-filled units, provide existing oil analysis and PCB documentation when available; missing records should be identified, not replaced with assumptions about age.
Where it sits
How it runs
The process begins with photographs and records, followed by a review of the Hickory site. Capture the nameplate, all four sides, cable compartments and the route to the loading point.
Note whether a furniture plant's dock, fence or overhead piping limits access for a crane or lowboy.
Removal follows electrical isolation by qualified personnel, not a pickup driver's inspection. At a 240-volt delta installation, the contractor must identify every connection and possible backfeed before disconnection.
Confirm lifting provisions, documented weight, oil containment needs and pad access before choosing rigging or assigning the truck.
On the ground
Around North Carolina
Transformer Buyers NC buys equipment throughout North Carolina, including Hickory and nearby Conover, Newton and Lenoir. A furniture facility closing one building may have several unrelated transformer configurations.
Keep each nameplate paired with its own photographs so a 240-volt delta unit is not confused with another building's equipment.
For a Hickory owner coordinating several North Carolina sites, organize records by location and asset number rather than by appearance. Two similar tanks can have different voltages or weights.
Identify which units are disconnected, which remain energized and which require landlord, utility or trustee authorization before removal.
Local reality
First step
Start with one clear nameplate photograph and a wide view of the Hickory transformer in place. Include the equipment address, ownership contact and whether the unit is operating, disconnected or failed.
If the plate is unreadable, send drawings or maintenance records without guessing at the voltage.
For equipment from the furniture corridor, add the 240-volt delta connection details and the planned shutdown date, if one exists. Explain whether the transformer sits outdoors, inside an electrical room or behind production machinery.
That information supports an initial review without requiring anyone to open energized compartments.
Get started
Get an offer in minutes
Five fields is all it takes. Photographs help, but a nameplate and a town are enough to start.
No fee, no obligation. We reply the same business day.
Tell us what you have
We reply the same business day.
Questions
Straight answers
Equipment types
Who buys failed transformers from Hickory furniture plants?
Transformer Buyers NC buys failed transformers from Hickory furniture plants as well as used, surplus and obsolete units. Describe the failure, provide nameplate photographs and identify any oil leakage. A winding fault or damaged bushing does not automatically exclude the equipment from consideration.
Service area
Does a 240-volt delta connection affect the review?
Yes. For Hickory equipment, the review needs the actual connection diagram, not just a reference to 240 volts. Identify any center tap and provide the primary voltage and kVA rating. Existing drawings are useful when an older furniture-plant nameplate is damaged or illegible.
Payment
Can a Hickory facility transfer a utility-owned transformer?
A Hickory facility cannot authorize transfer of a transformer it does not own. Check the service agreement and asset records before arranging removal. Utility-owned equipment must be handled through its owner, even when the transformer stands on the facility's property beside customer-owned electrical equipment.
Logistics
Around North Carolina: what should a seller know?
Transformer Buyers NC buys equipment throughout North Carolina, including Hickory and nearby Conover, Newton and Lenoir. A furniture facility closing one building may have several unrelated transformer configurations.
Testing
First step: what should a seller know?
Start with one clear nameplate photograph and a wide view of the Hickory transformer in place. Include the equipment address, ownership contact and whether the unit is operating, disconnected or failed.