What we buy
Ranges we buy on this page
Transformer Buyers NC buys used, surplus, failed and obsolete electrical transformers in Burlington, Alamance County. This page covers local equipment, ownership checks and removal planning for plant engineers, facility directors, contractors and trustees.
Burlington’s older textile buildings and interstate distribution sites present different lifting and access problems. Nameplate records, disconnect status and a clear route from the transformer pad help establish what a removal requires.
| Phase | kVA | Voltage | Fluid |
|---|---|---|---|
| 1-phase | 10 - 333 kVA | up to 25 kV | Liquid or dry |
| 3-phase | 50 - 20,000 kVA | 115 kV | Liquid or dry |
Who we buy from
Six kinds of seller
- Recyclers
- Electrical contractors
- Equipment dealers
- End users
- Demo contractors
- Distributors
Fast offers
A written offer the same business day, based on your photographs.
Dedicated logistics
Our own crew, trailer and crane, not a brokered haul.
No broker fees
One buyer from first call to cleared pad, with nothing skimmed.
How it works
Six steps from photograph to payment
- 01
Take pictures
Photograph the nameplate, the inside of the cabinet and the tank from both ends. Four frames on a phone are enough to price most units.
- 02
Send them to us
Email or text the photographs with the site address and whether the unit is still energised. We reply the same business day with questions or a number.
- 03
Review the offer
The offer names the unit, the site, the price and the pickup window. It is written, dated and good for thirty days unless the unit changes hands.
- 04
We schedule freight
A crew, a trailer and a crane if the pad needs one. You get the date and the arrival window, and the site does not have to close for it.
- 05
Testing on arrival
Winding resistance, insulation resistance and a turns ratio check, plus oil analysis where the unit is liquid-filled. Results travel with the unit.
- 06
Get paid
Payment is released against the signed bill of sale and the scale ticket, by check or ACH, with the paperwork copy left on site.
What we handle
The parts sellers dread
Rigging
Crane, skates and a route survey for anything that will not roll onto a trailer.
Oil containment
Pans, absorbent and a spill plan before a drain plug is touched.
Bill of sale
A document that clears a lien, a lease or a bankruptcy file, not a handwritten note.
PCB paperwork
Testing and manifesting for pre-1979 oil, handled before the unit moves.
On the ground
Burlington at a glance
Burlington sits in Alamance County within the Piedmont Triad region. The county has about 175,000 residents, and Graham is the county seat.
Transformer removal planning starts at the individual property: a former mill courtyard differs sharply from a distribution center’s open service yard.
At Burlington’s older industrial properties, the transformer may stand beside an occupied building rather than in a separate substation enclosure. Record the distance between the tank, wall and fence.
Those measurements determine whether lifting equipment can reach the unit without disturbing adjacent electrical equipment.
Local reality
Who serves the power in Burlington
Duke Energy Carolinas serves Burlington. Before treating a transformer as a plant asset, check ownership through service records and utility correspondence.
A unit inside the property fence is not necessarily customer-owned, and its location alone does not establish authority to transfer or remove it.
For a Burlington shutdown, distinguish utility service isolation from work on customer-owned 480-volt equipment. Qualified electrical personnel must establish safe conditions, including checks for alternate feeds and backfeed.
Removal planning needs the disconnect schedule and the responsible party’s confirmation, not an assumption based on silence.
Around the site
What the industrial base holds
Burlington’s industrial base includes textile legacy plants, plastics, food processing and distribution along the interstate. Equipment records should identify which process each transformer served.
A retired loom bay, molding line or refrigeration load can leave different secondary connections and different restrictions on the shutdown window.
The mill buildings here were wired for 480-volt three-phase in the 1960s and never changed. During an assessment, compare the transformer nameplate with present switchgear labels.
A building’s familiar voltage does not reveal winding configuration, impedance, primary voltage or whether later alterations changed its connections.
Where it sits
Roads, rail and port
I-40 and I-85 provide Burlington’s principal highway connections for transformer transport. Highway proximity does not settle the pickup route.
The carrier still needs gate width, turning space and clearance information between the equipment location and the street, especially at older mill entrances with tight corners.
Burlington also lies on the Norfolk Southern main line, with the Port of Wilmington roughly 165 miles southeast. These connections provide regional context, not automatic loading options.
Rail movement requires suitable facilities and coordination; port routing does not replace a documented plan for the initial lift.
On the ground
Moving a unit out of Burlington
A Burlington pickup assessment needs transformer weight, dimensions and photographs of lifting points. Include attached radiators, bushings and any separate cooling equipment.
The lifting contractor must evaluate the tank’s condition and approved lifting provisions before selecting a crane, spreader bar or other handling arrangement for removal.
Inside a Burlington mill, the difficult step may be reaching the loading door rather than reaching I-85. Measure door openings, overhead pipes and floor transitions.
Confirm slab capacity along the proposed handling route, and identify oil containment requirements before moving a liquid-filled unit across occupied space.
Local reality
What we see here
Burlington assessments should distinguish intact surplus equipment from failed units with damaged bushings, leaking radiator gaskets or evidence of internal arcing. Photographs cannot establish electrical condition.
Include available test reports and the failure description so an apparently sound tank is not mistaken for a serviceable transformer.
For older Alamance County transformers, insulating-fluid records deserve attention before removal. Send laboratory reports, PCB documentation and any spill history associated with the unit.
Age alone does not establish fluid composition, and an unreadable label is not a substitute for sampling or applicable handling requirements.
Around the site
What to send
For a Burlington transformer assessment, send a readable nameplate photograph showing kVA, primary and secondary voltages, phase, impedance and serial number. Add overall photographs from each accessible side.
Include the equipment’s location within the property and identify whether cables, bus duct or conduit remain connected.
The Burlington removal file should also contain ownership authorization, available maintenance records and the proposed access window. State whether the transformer remains energized and who controls isolation.
For a failed liquid-filled unit, include fluid test results, leak photographs and any restrictions imposed by ongoing plant operations.
Get started
Get an offer in minutes
Five fields is all it takes. Photographs help, but a nameplate and a town are enough to start.
No fee, no obligation. We reply the same business day.
Tell us what you have
We reply the same business day.
Questions
Straight answers
Equipment types
Can you buy transformers from Burlington textile mills?
Yes. We buy used, surplus, failed and obsolete transformers from Burlington textile properties. For a mill with longstanding 480-volt three-phase service, send the nameplate and connection photographs rather than relying on building voltage alone. Ownership authorization and access measurements are also needed.
Service area
Can a Duke Energy Carolinas transformer be included?
Only the authorized owner can approve a transformer transfer. At a Burlington property, check Duke Energy Carolinas service records before including a pad-mounted unit in a removal scope. Customer ownership of the land or nearby switchgear does not establish ownership of the transformer.
Payment
What access details matter at older Burlington mills?
Provide gate width, loading-door dimensions, overhead clearances and photographs of the route from the transformer to the truck position. Burlington mill courtyards may constrain crane setup even with I-40 and I-85 nearby. Include floor-capacity information if the handling route passes through the building.
Logistics
Burlington at a glance: what should a seller know?
Burlington sits in Alamance County within the Piedmont Triad region. The county has about 175,000 residents, and Graham is the county seat.